Turkey leading manufacturer of Concrete Batching Plant & Crushing and Screening Plant

+90 (533) 015 28 96

fabocompany@fabo.com.tr
NEWS 90 Per Hour Mobile Concrete Batching Plant

Product Category

Contact Us

Phone : +90 (232) 856 01 57 Fax : +90 (232) 856 01 58 Gsm : +90 (533) 015 28 96
Address : 29 Ekim Mah. Namık Kemal Cad. No 120 Yazibasi - Torbali / iZMiR / TURKEY

90 Per Hour Mobile Concrete Batching Plant

Subject: Mobile Concrete Plants
 
Capacity: 90 m3 Portable Concrete Plant
 
Type: Mobile Concrete Plant
Product Description                                           
Capacity:                                      90 m3
MAİN CHASSİS:                          Manufactered from NPU 240
Dimensions:                                2800 x 4000 x 16000 mm
Cement Silo                                 30 TON
MAIN CHASSIS :
 
Chassis Material :
100 x 200 x 4 mm and 150 x 100 x 4 mm steel rectangular profile. Weldment joints of the chassis are reinforced by sheet metal. The plant has one unit axle with four tyres.
 
AGGREGATE STORAGE HOPPER :
Volume: 40 m³
Number of Hopper Sections: 4 x 10 m³
Sheetmetal Material and Thickness: St 37 – 5 mm
Pneumatic Equipment: 80 x 300 mm pneumatic cylinders on each section Gates.
Vibromotor: 0.18 kW – 1 piece
AGGREGATE WEIGHING HOPPER:
Weighing Capacity : 1 m³
Sheetmetal Material and Thickness :
St 37 – 5 mm
Vibromotor : 0.18 kW – 1 piece
Load – cell : 4 x 2000 kg
 
AGGREGATE WEIGHING BELT CONVEYOR :
Dimensions :1000 x 4000 mm
Belt Rubber : 4 layers – 10 mm
Conveyor Electric Motor : 5.5 kW
Conveyor Chassis Material :
140 x 60 x 6 mm C channel steel.
Distance between the roller chassises : 400 mm
MIXER FEEDING BELT CONVEYOR :  
Dimensions : 1000 x 9500 mm
Belt Rubber : 4 layers – 10 mm
Conveyor Electric Motor : 7.5 kW
Conveyor Chassis Material :
120 x 60 x 6 mm C channel steel.
Distance between the roller chassises : 500 mm
MIXER :
Wet Concrete Volume : 2 m³
External Body Material and Thickness : St 37 – 8 mm
Internal Body Material and Thickness : St 52 – 8 mm
Mixer Electric Motor : 55 kW – 1450 rev/min united with gearbox
Number of Mixing Arms and Scrapers : 9 units
Material of Mixing Arms : Ø60 mm
Material of Mixing Scrapers : Steel casting with Cr and Mn alloy.
100 x 300 mm pneumatic cylinder with valve on the discharging gate.
Magnetic Sensors on the gate which perceives the lid open or closed.
(Ladder, platform and parapets are included.)
CEMENT HOPPER
Cement Weighing Capacity : 1200 kg
Sheetmetal Material and Thickness : St 37 – 4 mm
Pneumatic Equipment : WAM Brand butterfly valve
with pneumatic actuator
Load – cell : 3 x 1000 kg
Vibromotor : 0,12 Kw – 1 piece
WATER WEIGHING HOPPER :
Water Weighing Capacity : 600 kg
Sheetmetal Material and Thickness : St 37 – 4 mm
Pneumatic Equipment : 63 x 100 mm pneumatic cylinder with valve.
Load – cell: 3 x 1000 kg
ADMIXTURE WEIGHING HOPPER :
Admixture Weighing Volume : 50 lt
Sheetmetal Material and Thickness: St 37 – 4 mm
Pneumatic Equipment : 40 x 100 mm pneumatic cylinder with valve
Load – cell: 1 x 150 kg
CEMENT SCREW CONVEYOR :
1 units
Dimensions : Ø273 x 8000 mm
Electric Motor : 9.5 kW – 1450 rev/min united with gearbox
CEMENT SILO
1 Unit
 
Capacity: 100
 
Silo Pressure Valve
 
WAM Level Indicators : ILTC220 indicators
 
located at Top and bottom automatic cutting.(WAM)
 
Fluidization Nozzle : per silo, U025 (WAM)
 
Mechanical Valve and Arm : V2FS300S + CM4 (WAM)
 
Pneumatic pipe installation
 
CONTROL CABIN:
Heat isolated control cabinet located on the chassis of the plant on the mixer platform.
 
WATER PUMP : 1 unit ,3 kW, 60 Ton/h
 
AIR COMPRESSOR :
Compressed air Storage Volume : 300 lt.
Motor Power : 5 HP
Maximum Air Pressure: 12 Bar
AUTOMATION SYSTEM
-The plant is fully automated and the system is controlled on an 8" colored touch-screen with
integrated mouse and keyboard connection points.
- The system is equipped with Siemens electrical installation devices and sensors. Remote stations with
distributed I/O stations are also part of the plant automation.
- Advanced PLC programs and error control algorithms enable high sensitivity in weighing and dosage
control even at maximum capacity.
- The MCC and command panel is built for all working conditions and equipped with electrical protection systems.
- The operator is able to set up all parameters, enter receipts and perform calibration operations on
the touch-screen. All process, production and failure information are also visible and may be printed by
the operator.
-The operator may chose between automatic or manual operations on the illuminated mimic diagram.
Digital indicators enable the operator to follow voltage and current values on the screen.
 
- The system provides real-time






1-mobile concrete batching plant for sale

2-mobile concrete batching plant for hire

3-mini mobile concrete batching plant

4-portable concrete batching plant

5-mobile concrete batching plant price

6-mobile concrete batching plant for sale

7-mobile concrete batching plant for hire

8-mobile concrete batching plant video

9-mobile concrete batching plant manufacturers

10-stationary concrete batching plant

11-concrete mixing plant

12-concrete mixer